Tempered rectangular panel
Rectangle · 24 × 36 in · 1/4 in · Clear · Tempered · Flat polished
Cut to size and polished first, then heat-treated.
$255.92estimate
Customize and orderTempered glass, cut to size.
A 24 × 36 in piece of 1/4 in clear tempered glass with flat polished edges costs $255.92. Tempering is offered from 1/4 in thickness in clear, low-iron, tint gray and frosted glass, in rectangles, squares, rounds and ovals.
Free standard shipping to the 48 contiguous states and Washington, D.C. Orders usually ship within 3–5 days; delivery time is extra.
Preset sizes
Order one as it is, or open it in the configurator and change the size, thickness, glass or edge.
Tempered square panel
Square · 24 × 24 in · 1/4 in · Clear · Tempered · Flat polished
A 24 in square, sized and polished before tempering.
$197.66estimate
Customize and order
Round tempered table top
Round · 24 in diameter · 3/8 in · Clear · Tempered · Flat polished
A 24 in round in 3/8 in clear glass with a flat polished edge.
$277.94estimate
Customize and order
Clear glass shelf
Rectangle · 10 × 30 in · 3/8 in · Clear · Tempered · Flat polished
10 in deep and 30 in long, in 3/8 in tempered glass.
$201.48estimate
Customize and orderPrices by size
Estimates for one piece from our configurator, in USD, with free standard shipping and before sales tax. A dash means that combination is not offered.
| Size | 1/4 in | 3/8 in | 1/2 in |
|---|---|---|---|
| 12 × 24 in | $148.72 | $195.81 | $204.88 |
| 18 × 30 in | $192.26 | $280.55 | $297.56 |
| 24 × 36 in | $255.92 | $397.18 | $424.40 |
| 30 × 48 in | $369.61 | $605.05 | $650.41 |
| 36 × 60 in | $509.57 | $862.73 | $930.77 |
Any other size from 6 to 60 in per side, up to 24 sq ft, is priced in the configurator.
Specifications
- Thicknesses
- 1/4, 3/8 and 1/2 in clear; 1/4 and 3/8 in tint gray and frosted; 1/4, 3/8 and 1/2 in low-iron
- Size range
- Each side 6 to 60 in, up to 24 sq ft per piece
- Edges
- Seamed, flat polished or beveled
- Shapes
- Rectangle, square, round, oval
- Shipping
- Free standard shipping to the 48 contiguous states and Washington, D.C. Orders usually ship within 3–5 days; delivery time is extra.
Questions
Can tempered glass be cut after it is made?
Tempered glass is heat-treated, and it cannot be recut or drilled afterward, so final sizing and any holes must be completed before tempering. Measure carefully and settle the final size before you order.
Which thicknesses can be tempered here?
Tempering is offered from 1/4 in for clear, low-iron clear, tint gray and frosted glass. Standard mirror is not tempered in the configurator.
How is tempering priced?
Tempering appears as its own line in the estimate: a minimum charge, or a rate per square foot on larger pieces, whichever is higher.
Which thickness should I choose?
The right thickness depends on the size of the piece, how it is supported and what it is used for, so we do not recommend a thickness for a particular installation. Product names such as “shelf” and “table top” describe a common use, not a load rating. Confirm glass specifications and safety requirements with a qualified professional.
Every piece is cut to your measurements, so we cannot accept returns for a change of mind or for sizes that were measured incorrectly. Damage in shipping and our own mistakes are covered — see the shipping and returns questions on the home page.