Low-iron glass panel
Rectangle · 24 × 36 in · 1/4 in · Low-iron clear · Annealed · Flat polished
Less green tint and more neutral clarity than standard clear glass.
$374.35estimate
Customize and orderLow-iron glass, cut to size.
A 24 × 36 in panel of 1/4 in low-iron glass with flat polished edges costs $374.35, or $402.37 tempered. Low-iron glass has less green tint and more neutral clarity than standard clear glass, which is most noticeable on the edge.
Free standard shipping to the 48 contiguous states and Washington, D.C. Orders usually ship within 3–5 days; delivery time is extra.
Preset sizes
Order one as it is, or open it in the configurator and change the size, thickness, glass or edge.
Prices by size
Estimates for one piece from our configurator, in USD, with free standard shipping and before sales tax. A dash means that combination is not offered.
| Size | 1/4 in annealed | 1/4 in tempered | 3/8 in tempered | 1/2 in tempered |
|---|---|---|---|---|
| 12 × 24 in | $178.84 | $197.54 | $297.83 | $317.16 |
| 18 × 24 in | $227.71 | $246.41 | $396.86 | $425.85 |
| 24 × 36 in | $374.35 | $402.37 | $703.26 | $761.23 |
| 36 × 48 in | $661.88 | $717.92 | $1,319.70 | $1,435.64 |
Any other size from 6 to 60 in per side, up to 24 sq ft, is priced in the configurator.
Specifications
- Thicknesses
- 1/4, 3/8 and 1/2 in
- Strength
- Annealed or tempered
- Size range
- Each side 6 to 60 in, up to 24 sq ft per piece
- Edges
- Flat polished, seamed or beveled
- Shipping
- Free standard shipping to the 48 contiguous states and Washington, D.C. Orders usually ship within 3–5 days; delivery time is extra.
Questions
What is the difference between low-iron and clear glass?
Standard clear glass has a slight green tint, easiest to see on the edge and in thick pieces. Low-iron glass has less green tint and more neutral clarity.
How much more does low-iron glass cost?
The glass itself costs about twice as much per square foot as clear. For example, a 24 × 36 in 1/4 in tempered piece is $255.92 in clear and $402.37 in low-iron.
Can low-iron glass be tempered?
Yes, from 1/4 in. Tempered glass is heat-treated, and it cannot be recut or drilled afterward, so final sizing and any holes must be completed before tempering.
Which thickness should I choose?
The right thickness depends on the size of the piece, how it is supported and what it is used for, so we do not recommend a thickness for a particular installation. Product names such as “shelf” and “table top” describe a common use, not a load rating. Confirm glass specifications and safety requirements with a qualified professional.
Every piece is cut to your measurements, so we cannot accept returns for a change of mind or for sizes that were measured incorrectly. Damage in shipping and our own mistakes are covered — see the shipping and returns questions on the home page.