Gray glass panel
Rectangle · 24 × 36 in · 1/4 in · Tint gray · Annealed · Flat polished
Transparent gray-tinted glass with flat polished edges.
$278.44estimate
Customize and orderGray tinted glass, cut to size.
A 24 × 36 in panel of 1/4 in gray tinted glass with flat polished edges costs $278.44, or $306.46 tempered. Tint gray is transparent glass with a neutral gray tone, in 1/4 and 3/8 in.
Free standard shipping to the 48 contiguous states and Washington, D.C. Orders usually ship within 3–5 days; delivery time is extra.
Preset sizes
Order one as it is, or open it in the configurator and change the size, thickness, glass or edge.
Prices by size
Estimates for one piece from our configurator, in USD, with free standard shipping and before sales tax. A dash means that combination is not offered.
| Size | 1/4 in annealed | 1/4 in tempered | 3/8 in tempered |
|---|---|---|---|
| 12 × 24 in | $146.87 | $165.57 | $231.02 |
| 18 × 30 in | $205.15 | $223.85 | $346.57 |
| 24 × 36 in | $278.44 | $306.46 | $502.82 |
| 30 × 48 in | $407.15 | $453.85 | $781.11 |
Any other size from 6 to 60 in per side, up to 24 sq ft, is priced in the configurator.
Specifications
- Tint
- Transparent neutral gray
- Thicknesses
- 1/4 and 3/8 in
- Strength
- Annealed or tempered
- Size range
- Each side 6 to 60 in, up to 24 sq ft per piece
- Shipping
- Free standard shipping to the 48 contiguous states and Washington, D.C. Orders usually ship within 3–5 days; delivery time is extra.
Questions
Is gray glass see-through?
Yes. Tint gray is transparent glass with a gray tone; it is not a mirror or a privacy glass.
Can gray glass be tempered?
Yes, in 1/4 and 3/8 in. Tempered glass is heat-treated, and it cannot be recut or drilled afterward, so final sizing and any holes must be completed before tempering.
Which edges are available?
Flat polished, seamed or beveled.
Which thickness should I choose?
The right thickness depends on the size of the piece, how it is supported and what it is used for, so we do not recommend a thickness for a particular installation. Product names such as “shelf” and “table top” describe a common use, not a load rating. Confirm glass specifications and safety requirements with a qualified professional.
Every piece is cut to your measurements, so we cannot accept returns for a change of mind or for sizes that were measured incorrectly. Damage in shipping and our own mistakes are covered — see the shipping and returns questions on the home page.