Clear glass shelf
Rectangle · 10 × 30 in · 3/8 in · Clear · Tempered · Flat polished
10 in deep and 30 in long, in 3/8 in tempered glass.
$201.48estimate
Customize and orderGlass shelves, cut to size.
A 10 × 30 in clear tempered shelf in 3/8 in glass with flat polished edges costs $201.48, and an 8 × 24 in shelf in 1/4 in tempered glass costs $132.41. Enter any depth and length from 6 to 60 in.
Free standard shipping to the 48 contiguous states and Washington, D.C. Orders usually ship within 3–5 days; delivery time is extra.
Preset sizes
Order one as it is, or open it in the configurator and change the size, thickness, glass or edge.
Narrow glass shelf
Rectangle · 8 × 24 in · 1/4 in · Clear · Tempered · Flat polished
8 in deep and 24 in long, in 1/4 in tempered glass.
$132.41estimate
Customize and orderPrices by size
Estimates for one piece from our configurator, in USD, with free standard shipping and before sales tax. A dash means that combination is not offered.
| Size | 1/4 in | 3/8 in | 1/2 in |
|---|---|---|---|
| 8 × 24 in | $132.41 | $163.80 | $169.85 |
| 10 × 30 in | $152.43 | $201.48 | $210.93 |
| 12 × 36 in | $176.06 | $246.69 | $260.30 |
| 12 × 48 in | $203.40 | $297.58 | $315.72 |
Any other size from 6 to 60 in per side, up to 24 sq ft, is priced in the configurator.
Specifications
- Thicknesses
- 1/8 to 1/2 in clear; 1/4 in and up for low-iron, gray and frosted
- Size range
- Each side 6 to 60 in, up to 24 sq ft per piece
- Edges
- Flat polished, seamed or beveled
- Corners
- Standard, eased, or 1 in radius and polished
- Shipping
- Free standard shipping to the 48 contiguous states and Washington, D.C. Orders usually ship within 3–5 days; delivery time is extra.
Questions
How much weight will a glass shelf hold?
The load a shelf can carry depends on its thickness, its span, how it is supported and whether it is tempered. We do not give load ratings; the name “shelf” describes a common use. Confirm glass specifications and safety requirements with a qualified professional.
Should I choose tempered or annealed?
Both preset shelves are tempered. Tempered glass is heat-treated, and it cannot be recut or drilled afterward, so final sizing and any holes must be completed before tempering.
Can you drill holes or notches for brackets?
Holes, notches and cutouts are outside the configurator. Describe the project in a project request on the home page.
How do I measure a shelf?
Measure the depth and the length at two or more points, to the nearest 1/8 in, and enter the finished size. Nothing is taken off for clearance, so settle any gap first.
Every piece is cut to your measurements, so we cannot accept returns for a change of mind or for sizes that were measured incorrectly. Damage in shipping and our own mistakes are covered — see the shipping and returns questions on the home page.