
Clear rectangular glass
Rectangle · 24 × 36 in · 1/4 in
Clear · Annealed · Flat polished
A clear sheet with flat polished edges on all four sides.
$227.90estimate
Choose a shape, enter your size in inches and pick an edge. The estimate updates with every change.

Six places to start. Each opens two preset sizes you can add as they are or change.
Add one as it is, or open it in the configurator and change anything.
12 products

Rectangle · 24 × 36 in · 1/4 in
Clear · Annealed · Flat polished
A clear sheet with flat polished edges on all four sides.
$227.90estimate

Rectangle · 24 × 36 in · 1/4 in
Low-iron clear · Annealed · Flat polished
Less green tint and more neutral clarity than standard clear glass.
$374.35estimate

Rectangle · 24 × 36 in · 1/4 in
Clear · Tempered · Flat polished
Cut to size and polished first, then heat-treated.
$255.92estimate

Square · 24 × 24 in · 1/4 in
Clear · Tempered · Flat polished
A 24 in square, sized and polished before tempering.
$197.66estimate

Round · 24 in diameter · 3/8 in
Clear · Tempered · Flat polished
A 24 in round in 3/8 in clear glass with a flat polished edge.
$277.94estimate

Oval / ellipse · 24 × 36 in · 3/8 in
Clear · Tempered · Flat polished
A 24 × 36 in oval in 3/8 in clear glass.
$435.61estimate

Rectangle · 10 × 30 in · 3/8 in
Clear · Tempered · Flat polished
10 in deep and 30 in long, in 3/8 in tempered glass.
$201.48estimate

Rectangle · 8 × 24 in · 1/4 in
Clear · Tempered · Flat polished
8 in deep and 24 in long, in 1/4 in tempered glass.
$132.41estimate

Rectangle · 24 × 36 in · 1/4 in
Standard mirror · Flat polished
A frameless 24 × 36 in mirror with flat polished edges.
$156.26estimate

Round · 24 in diameter · 1/4 in
Standard mirror · Flat polished
A frameless 24 in round mirror with a flat polished edge.
$177.90estimate

Rectangle · 24 × 36 in · 1/4 in
Tint gray · Annealed · Flat polished
Transparent gray-tinted glass with flat polished edges.
$278.44estimate

Rectangle · 18 × 30 in · 1/4 in
Frosted (acid-etched) · Annealed · Flat polished
Translucent acid-etched glass with a satin surface.
$405.22estimate
Try another word, or clear the filters to see all twelve.
Customize your glass →Three steps. Change anything and the summary on the right recalculates.
Holes, notches or a larger piece?


Measure the width and the length, and write each down to the nearest 1/8 in.
Take each measurement at two or more points. If the numbers differ, note every one before you decide.
The estimate uses exactly the width and length you enter. Nothing is added or taken off for clearance, so settle any gap you want before you type the size.
1/8 = 0.1251/4 = 0.253/8 = 0.3751/2 = 0.55/8 = 0.6253/4 = 0.757/8 = 0.875
Tempered glass cannot be recut or drilled afterward, so final sizing and any holes must be completed first.
Compare your numbers with the opening, the surface or the support the glass will rest on before you add it to the cart.
Not covered here?
Type the finished width and length in inches, using decimals in steps of 0.125. That is 1/8 in, so 24 1/8 in is 24.125. Here each side can be 6 to 60 in and one piece can be up to 24 sq ft. At 1/8 in thickness each side can be up to 24 in, and at 3/16 in up to 36 in.
The configurator offers 1/8, 3/16, 1/4, 3/8 and 1/2 in. The right one depends on the size of the piece, how it is supported and what it is used for, so this page does not recommend a thickness for a particular installation. Product names such as “shelf” and “table top” describe a common use, not a load rating. Confirm glass specifications and safety requirements with a qualified professional.
Tempered glass is heat-treated; final sizing and any holes must be completed before tempering because tempered glass cannot be recut or drilled afterward. Here it is offered from 1/4 in for clear, low-iron clear, tint gray and frosted glass, and it appears as its own line in the estimate.
From the area of the glass, its thickness and type, the length and finish of the edge, any tempering, shape or corner work, and a setup charge for each piece. A piece smaller than 1 sq ft is charged a 1 sq ft material minimum. The summary beside the configurator lists every line.
Sales tax, which is added when we confirm your order. Standard shipping to the continental US is free. See shipping and returns below.
Larger pieces, other thicknesses, holes, notches, cutouts, other corner radii and installation are outside the configurator. Describe the project in a request and include the sizes you have. A request describes what you need. It does not confirm that the work can be made.
Standard shipping is free on every order to the 48 contiguous states and Washington, D.C. We do not ship to Alaska, Hawaii, US territories, military (APO/FPO) addresses or P.O. boxes. Orders usually ship within 3–5 days; delivery time is extra. Local pickup is not available.
Every piece is cut to your measurements, so we cannot accept returns for a change of mind or for sizes that were measured incorrectly. Please check your measurements before you order.
To start a claim, email lackeyglass@outlook.com with your name and order details.

Larger pieces, other thicknesses, holes, notches and cutouts are outside the configurator. Describe the project and prepare a request summary you can copy.
Useful to include
A request describes what you need. It does not confirm that the work can be made.
Enter the size once. See every line of the estimate before you add it to the cart.
Customize your glassBrowse the collection